Glock 26 slide
Glock 26 slide LTD Edition Cerakote Glock 26 Gen 3 and Gen 4 ZPS.2 Slide. This slide is part of our Limited Edition Cerakote slide series that we pre-cut and coat to insure your order ships quickly. This means no additional wait times for coating or optic cuts and no need to send your slide to us! Due to overwhelming response from our customers we decided to offer a limited run of unique custom slides. There aren’t large quantities and when they’re gone they’re gone. Hopefully we’ll be offering limited runs on a weekly basis so stay tuned!
Glock 26 slide for sale
Single billet 17-4 stainless steel slides are made with tight tolerances that allow an increase in accuracy and performance. 100% American made and manufactured at our facility. These are among the best aftermarket slides available for Glock.
*** Slide has been Optic Cut and Limited Custom Cerakoted – no changes can be made to this slide. ***
Cerakote colors: Battleworn Tactical Grey
Fits Glock 26 – Gen 3 and Gen 4 frame
Features:
- 100% made in the USA
- Machined from billet 17-4 Stainless Steel
- Optic Cut – Trijicon RMR / SRO and Holosun 407c / 507c
- Slide is pre-cut and pre-Cerakoted
- Black anodized optics cover plate included
*IMPORTANT – This LTD Edition Cerakote Glock 26 Gen 3 and Gen 4 ZPS.2 Slide IS NOT PORTED Compatible. ZP PORTED barrels are only compatible with the ZPS.P and ZPS.4 slides.
No parts will be assembled. Installation services are an option
Slide Optics Cut (red dots):
Trijicon RMR / SRO and Holosun 407c / 507c and other popular “RMR footprint” optics – mounting position is in front of the factory location of the rear sight (dovetail remains behind the optic cut). Includes black anodized cover plate.
Slide comes with proper mounting screws specific to the optic. You must use the screws we provided. Blue Loctite recommended for proper sight retention. Do not exceed optic manufacturer’s screw torque specifications. For additional lengths and torque specs.
DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
Maison –
This holster fits my G27 & G26 perfectly. Minuscule extra leather beyond the barrel. G23 & G19 fit great with approximately 1 inch of the barrel exposed.
This holster is tight, as it should be, and will require break in. You may also have to twist the thumb break, get it wet first, then use a spoon or butter knife to get it to snap shut at first. This is normal. No need to oil it, just smoosh the holster a little bit to loosen it up.
Fit and finish are not far off compared to my Mitch Rosen holsters, so at $50, it’s a great value.
Alex –
Got the holster today it’s a little tight but a really good fit . Only thing you need to do is run warm water over snap area and stretch over gun and let sit for a day or so . Well worth the money !
Tariq –
Good, high quality leather holster with solid thumb snap. You will want to let the gun sit in the holster a couple days before carrying; it’s VERY tight out of the package. Rides high on the body for adequate concealment with a jacket. Smells nice too. Leather is cut low enough on the slide to fit a mounted RMR on the G26.
Also fits a standard G17 with some barrel protrusion.
Louise –
This is my 3rd holster for my glock. Third times a charm. I had one actually drop holster and gun when I got off my bike. Not good. I ride a lot on a motorcycle and I need not only secure but strap to make sure I don’t bounce my firearm down the road behind me. This holster does that and is very comfortable. Hardley know it’s there. Still a little with on the draw but I expect that when knew. As I have had it several months now that is being worked on. All in all I am extremely pleased.
Cameron –
Good quality leather, a little stiff because of it being new. It does fit smaller semi auto guns and holds them in place.
I tried other name brand hard plastic holsters and did not care for them because, the did not keep my gun in place when sitting down at different angles, ( sitting back on couches, and recliner’s) also the sound when drawing my weapon from a plastic just seemed to bother me. I like a quiet smooth draw and so far this has done it. Just my opinion.
Maison –
When I first saw this holster I thought it looked really small and was going to be really tight on the gun. It is a little tight, but it’s brand new. It will break in. The slimness of it and high ride should carry a 26 well. The only knock I would give it – and why I gave it four stars here instead of five – is that it’s a little long past the muzzle of my 26. It’s about 1/4” of extra material and dead space, thus extra a little unnecessary extra to conceal. Otherwise, I like it a lot. Oh…and a 19 fits in it well.
Andre –
This holster is very good for the money, the only beef I have with it is that it took a while to break it in. The leather is thin but still very hard, sometimes the holster does tend to come unsnapped easier than it should. All things considered it is worth the money and I trust it with my life.
Brian –
Good quality leather, a little stiff because of it being new. It does fit smaller semi auto guns and holds them in place.
I tried other name brand hard plastic holsters and did not care for them because, the did not keep my gun in place when sitting down at different angles, ( sitting back on couches, and recliner’s) also the sound when drawing my weapon from a plastic just seemed to bother me. I like a quiet smooth draw and so far this has done it. Just my opinion.
Marion –
It’s a good holster for the gen 4 G27. It’s really tight out of the box. I had to stretch and finesse the leather a little longer than usual for a leather holster. Now that’s its broken in. Draw is smooth. Sits snug in the holster and is close to the body. 4 stars because of the extra break in time and this holster (thumb break) doesn’t allow for the dovetail grips on the gen 4 glocks. I don’t use them but others might want to.